Report demo - no upload required ยท Single

Aumixys sample report

This is what a readable analysis result looks like after measurement. The data is fictional and does not contain any real audio file.

Aumixys Demo Master.wav This demo report shows the value before upload. After your own analysis, Aumixys stores metrics and conclusions, but the report does not store the audio file.
Public sample

Key metrics

LUFS-I -12.8 loud but still clear
True Peak -1.1 dBTP safe streaming ceiling
Sample Peak -1.8 dBFS headroom below 0 dBFS
DR 8.4 dB moderate dynamics
LRA 5.9 LU stable loudness
BPM 126 EDM / pop tempo

Verdict

The master is close to streaming-ready. The main risk is strong low-end energy around 55-70 Hz and a slightly bright top end above 10 kHz. It is a good release candidate after a quick limiter and kick/bass relationship check.

Key: F# minor Duration: 3:42 Format: WAV 24-bit / 44.1 kHz Mode: Full track

Auto-QC

Info True Peak stays below -1.0 dBTP, so clipping risk after transcoding is low.
Watch The low end has elevated sub energy. Check limiter headroom and playback on smaller speakers.
Watch Stereo width is healthy, but the lowest bass should remain stable in mono.

Kick/Bass Beta

68% Moderate masking
Bass56 Hz / A#1
Kick63 Hz / B1
Risk zone58-72 Hz

Check dynamic EQ or light sidechain around 60-70 Hz. Do not cut broadly: start with a narrow 1-2 dB move and compare against a reference.

Frequency balance

Sub
72%
Low
80%
Low-mid
58%
Mid
54%
Presence
67%
Air
64%

AI Tips

Keep the limiter ceiling around -1.0 dBTP because the master is already loud enough.

Check kick and bass in mono. If the kick loses punch, reduce the conflict around 63 Hz.

Do not chase -14 LUFS blindly. This track can stay louder if dynamics and True Peak remain controlled.

Next step

Now the visitor can see the value before uploading. That lowers upload anxiety because the result is concrete: metrics, risks, and practical next steps.